Salt-Away is a water-based, non-hazardous, biodegradable solution and contains properties that dissolve, release and remove salt crystals from any surface. Water alone will not remove salt. Use of Salt-Away will not correct past damage but will work to protect against salt corrosion and reduces costly repairs caused by salt. Salt-Away breaks down and removes salt build-up with repeated use.

Salt-Away’s salt removing agent completely removes fresh salt and breaks down salt build-up. Its high, dense foaming action assists as an indicator to see where Salt-Away has been applied, and it also ‘clings’ to surfaces to slowly soak through the layers of salt. As the salt dissolves into the Salt-Away salt removing agent, the crystals are lifted into the solution. If Salt-Away is sprayed on the surface and not rinsed off, the water evaporates out of the solution and the salt crystals are embedded into the residue. The liquid and vapor corrosion inhibitors in the residue will not allow the salt crystals to attack the surface. If Salt-Away is rinsed off the surface, the salt crystals are lifted off the surface and washed away. A second application of Salt-Away is recommended for further protection. Salt-Away’s salt removing agent, which causes the foam, is non-hazardous.

Salt-Away - Marine Salt Remover

Buy Salt-Away Products:

BoatTest.com video about Salt-Away

The above head gaskets came out of the same outboard motor. Before he knew about Salt-Away, Greg Moss, the owner and mechanic of Moss Marine, Channelview, TX, had always flushed his motors with fresh water after every use in salt water. The gasket on the left, flushed with fresh water for a year, was removed during the motor's annual overhaul. Greg replaced the gasket with the one on the right and began flushing every time with Salt-Away. It was used in the motor for one year and was removed at the next annual overhaul.

Marine demonstration of Salt-Away